![]() ![]() So this is one of the first settings you want to adjust as you try to perfect your print quality. Many common 3D printing problems stem from a poor first layer. As the foundation to your whole print, it is essential in providing proper adhesion to the build plate. Otherwise, if you used 0 separation layers and you are printing everything with the same material, the supports may bond to the part and can become difficult to remove. The first layer of your print is probably the most important layer. For example, if you are printing your support structures with the same material as your part, it is common to use at least 1-2 vertical separation layers. This setting determines how many empty layers are left between the support structures and the part. ![]() The first setting you will want to check is the Upper Vertical Separation Layers. Simplif圓D allows your to customize the separation settings, so that you can choose the correct balance between these different factors. If you provide very little support, the disposable support structures will be easy to remove, but the part may not have enough of a foundation to print successfully. If you provide too much support to the model, the support structures may start to bond to the part, making them difficult to separate. Creating removable support structures involves a fine balance between the amount of support provided to the model, and how easy the supports are to remove. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |